Utah County · Silicon Slopes
Lehi excavation splits into two very different jobs. On the valley floor, Silicon Slopes commercial and mixed-use work means large-volume mass excavation on aggressive schedules, where the dig is on somebody's critical path and a week of slip is expensive. Up on Traverse Mountain, it's benched residential lots where the challenge is cut and fill on a slope and keeping water moving the right direction. We do both, with our own fleet.

Lehi's tech and mixed-use projects run tight. Owning our equipment means we don't lose days waiting on a rental yard.
Hillside lots need engineered cut and fill and drainage planned alongside the dig, not after it.
Lehi's build-out density means excavation constantly runs into existing utilities. Locates and careful trenching are half the job.
We walk the site, review civil and geotech plans, confirm utilities are located, and set grade references before a machine moves.
Vegetation, debris, and topsoil are cleared and stockpiled or hauled off, with erosion controls placed per the SWPPP.
We cut to subgrade, balance fill on-site where possible, and compact in lifts to engineered density.
Utility trenches, footings, and detail excavation are dug to line and grade, shored and protected per OSHA.
We bring the site to subgrade tolerance, verify with survey, and leave it ready for the next trade.
Yes. We self-perform mass excavation, cut and fill, and subgrade prep, and we've delivered sitework packages on commercial and hospitality projects across Utah and the Mountain West.
Slope. Cut and fill has to be engineered, retaining is often part of the same scope, and drainage has to be solved during the dig — water moving the wrong way on a bench lot is expensive to fix later.